| Long Description | TeSys T is a motor management system that provides full motor monitoring, control, and protection when used with short circuit protection and a contactor. TeSys T manages most critical processes while reducing downtime and increasing productivity. TeSys T is a flexible system that integrates seamlessly into your automation system through five major communication protocols. TeSys T predicts what will happen in the process, as it accurately monitors current, voltage, and power over a wide range. This controller is the central component in the motor management system. The module manages the basic functions of the motor management system. It manages the measurement of 3 phase current via integral current transformers from 0.4 to 100 A or up to 810 A by external current transformers. It also measures ground current with internal or external ground sensors, motor temperature and the inputs and outputs for the various motor control modes, detected fault management and other functions. Profibus DP protocol is used by this controller. This module has 6 discrete logic inputs, 3 relay logic outputs and a relay output for detected fault signaling overload relay. The current range of this controller is 1.35 to 27 amperes. 120 to 240 VAC is used to power this controller. Controller is 2.40 inches tall, 3.58 inches wide and 4.82 inches deep. Controller weighs 1.17 lbs. Controller has the following certifications UL, CSA NOM, ATEX, BV, EAC, RINA, LROS, DNV, ABS, GL, KERI, RMRoS, C-Tick and CCC. | The Net-Verse™ D-Type versatile cabinets shall consist of a welded and assembled steel frame construction. Cabinets shall include curved perforated front single hinge doors with 69% air flow rate and split rear perforated doors. Cabinet shall have two horizontal side panels on each side or optional as an accessory. The cabinet shall have fully adjustable equipment rails with provision for front (800mm wide) cable management fingers fingers can be purchased separately or installed with the cabinet indicated by *F). The top of cabinet includes brush cable entry points to prevent air leakage. Cabinets shall have optional equipment rails, vertical blanking panels and bottom panels for effective air sealing. Cabinet shall have two full height PDU brackets, one on each side. The entire cabinet shall be fully electrically bonded, including equipment rails, doors, and side panels. Cabinets shall have static 1500kg (3300 lbs.)load rating and rolling 500kg (1100 lbs.). |
