| Long Description | High impact, warp-proof PVC, self-extinguishing, UL approved 94V-0. Color: Grey. Maximum service temperature: 85c. UL Test up to 50c. These devices are for routing of wires within devices in factory installations. Features parallel holes on both sidewalls to facilitate cutting in wire application. Special color, size, length upon request of reasonable quantity. | This is an inspection tool used to check a workpiece for the allowed tolerances. The term go and no go refers to the workpiece needs to pass a test(go) and fails the other(no go). It is most suitable to be used in production lines in factories. Using the minimum diameter of the hole as the Go and applying the tolerance PLUS insures that, if the Go plug goes through the hole, the hole is larger than the the minimum diameter. if the tolerance is applied minus on the Go , it is possible to accept product below the minimum stated diameter. Using the maximum diameter of the hole as the No-Go and applying the tolerance MINUS insures that, if the No-Go plug does not enter the hole, the hole diameter is smaller than the maximum diameter of the hole and in tolerance. If the tolerance is applied plus on the No-Go plug, it is possible to accept product above the maximum diameter of the hole. | High impact, warp-proof PVC, self-extinguishing, UL approved 94V-0. Maximum service temperature: 85c. Color: Grey (Brown, Milk, Light grained, Dark Grained available on request). Backed with high quality double sided tape for permanent stick. Good for floor wiring to facilitate trolly pass and to avoid trip. Special grooves design to avoid slip. Shining cover facilitate for decoration and suitable for department store, supermarket, shopping mall, station, hotel, hospital, office and any other public area. |
