Compare

You have selected 67 items to compare.

Next Page
 
PRECISION LOOP CALIBRATOR WITH HART 20MA 24VDC product photo
2031727
FLUKE-709H
HORIZONTAL TAPE-TO-STEEL SURFACE THRU JOINT 4X30MM product photo
2352066
HBSS304
BUSSMANN CERAMIC CARTRIDGE FUSE 500MA 5 X 20MM SPEED F (X 10PCS) product photo
2459746
537-1559
Price

SIGN IN TO VIEW PRICE

SIGN IN TO VIEW PRICE

SIGN IN TO VIEW PRICE

Ratings
  • (0)
  • (0)
  • (0)
Short DescriptionPRECISION LOOP CALIBRATOR WITH HART 20MA 24VDCHORIZONTAL TAPE-TO-STEEL SURFACE THRU JOINT 4X30MMBUSSMANN CERAMIC CARTRIDGE FUSE 500MA 5 X 20MM SPEED F
Long DescriptionThe Fluke 709H mA loop calibrator is designed to save time and produce high-quality results. It includes HART communication and supports a select set of the HART universal and common practice commands. This makes the 709H unique as both an affordable, compact loop calibrator and powerful HART communication tool that offers: Fast transfer of calibration data:The optional 709H/Track software/cable can document the parameters of all the HART transmitters in your plant, in either (.csv) or (.txt) format Data logging or recording data on a particular transmitter for troubleshooting: The data log tool offers a selectable capture interval from 1 to 60 seconds and a logging capacity of 9800 records or 99 individual sessions. Each data sample contains the 709H measurement, all four process variables, and the standard status conditions. In the communicator mode the user can read basic device information, perform diagnostic tests, and trim the calibration on most HART-enabled transmitters. In the past, this could only be done with a dedicated communicator, a high-end multifunction calibrator, or a laptop computer with HART modem. The Fluke 709H will allow virtually any technician to service and support HART devices. And it's easy to use. The Fluke 709H is built around a user-friendly interface with a Quick-Set rotary encoder knob. This reduces the time it takes to measure or source voltage or current, and power up a loop. The protective holster easily fits into a technician's hand and the large backlit display is easy to read, even in dark, cramped worked areas.The exothermic welding process is a method of making electrical connections of copper to copper or copper to steel in which no outside source of heat or power is required. In this process, granular metals (granular copper oxide and aluminium) are placed from a container into a graphite crucible and ignited. This process is a cost effective method of completing a high quality electrical connection and is also simple to follow.Typical Applications include short-circuit protection of semiconductors such as thyristors, diodes and triacs. Note that with values of greater than 6.3A the use of open type fuseholders is recommended, to reduce the risk of nuisance tripping at or near full rated current.
Brand/Manufacturer NameFLUKEEXOWELDRS
Manufacturing Part NumberFLUKE-709HHBSS304537-1559
Technical Attributes
Next Page