| Long Description | The AF Hydro VL-S-BMF-G-1000-06 is a 3/8-inch BSPP male-to-female mini ball valve designed for flow control in industrial fluid systems. Its body, cap and ball are constructed from SS316 stainless steel, with SS304 stainless steel stem and bolt components, an aluminium lever handle and a PTFE ball seat. The valve has a solid ball design and a rated working pressure of 1,000 PSI. With a 7 mm bore and compact dimensions of 40 mm length, 26.5 mm height and 22.9 mm width, it is suitable for installations where space is limited. The valve weighs approximately 0.084 kg. | The MSA ALTAIR 5X Multigas Detector is a rugged, portable gas monitoring instrument designed to help protect workers in hazardous environments. Powered by MSA XCell® sensor technology, it can monitor up to six gases simultaneously, depending on sensor configuration. Its durable housing, IP65-rated construction, integrated sampling pump, and clear display support reliable operation in industrial settings, including confined-space entry, oil and gas operations, plant maintenance, and emergency response. | Customized to fit the individual user’s needs, the motors in ABB’s M2000 range are designed to meet the tough demands of modern industry. All M2000 motors comply with eff1, the EU’s highest efficiency class – which translates into cost savings and better environmental compatibility. Reliable, high quality products that are designed to last, ABB’s M2000 motors offer years of trouble-free operation, even in critical environments. To ensure equipment can be safety used in potentially explosive atmospheres, the hazardous areas where the equipment is installed must be known. Temperature class of equipment must be compared with the spontaneous ignition temperature of the gas mixtures concerned and its gas group must be known in specific cases (e.g. flame proof protection). Combustible dusts is hazardous as it can form potentially explosive atmospheres when dispersed in the air. Furthermore, layers of combustible dust may ignite and act as ignition source for an explosive atmosphere. They meet all relevant international standards, including IEC, European (EN), ATEX and NEMA, and the most important specification requirements for the oil and gas industry. |
