| Long Description | This product is part of the 9050 A/H Pneumatic Timers range, an offer of limit switches. The limit switch is a device that converts a mechanical motion into an electrical control signal. It has 2 (normally closed - normally open), DPDT-DB (double pole double throw, double break) form ZZ, snap action contacts and a spring-return plastic plunger operator with thermoplastic end. It is a limit switch with a rated operational current of 0.6A at 600V AC, 0.75A at 480V AC, 1.5A at 240V AC, 3A at 120V AC, 0.1A at 250V DC, 0.2A at 125V DC and a conventional enclosed thermal current of 10A. It is furnished with screw clamp terminals for electrical connection. It is an IP20 and NEMA 1 rated product. This plunger head limit switch has a fixed body which is made of cast zinc. Its dimensions are 0.83inch (width) x 1.14inch (depth) x 2.5inch (height) and weighs 0.5lb. It is suitable for material working, packaging, materials handling, conveying, food and beverage, oil, gas, crane, hoisting, mill, foundry, mining and mineral construction. This product is certified by CSA. It complies with UL 508 standards. | This product is part of the XCS range, an offer of safety switches. The limit switch is a device that converts a mechanical motion into an electrical control signal. It has 2 normally closed + 1 normally opened, snap action contacts, normally closed contact with positive opening operation. It is a switch with a rated operational current of 1.5A at 240V AC, 0.1 at 250V DC. It is designed to operate in hazardous environments. It is furnished with screw terminals for electrical connection and 1 cable entry tapped for PG11. It supports minimum actuation speed of 0.01m/min and maximum actuation speed 0.5m/s. It offers long mechanical durability which is about 10 million operating cycles. It is an IP66, IP67, IP68 rated product. This plunger head limit switch has a fixed type body which is made of Zamak. Its dimensions are 30mm (Width) x 16mm (Depth) x 70mm (Height) and weighs 0.17kg. It is intended as far as safety is concerned all dangerous machines in all sectors are involved. Such as packaging, handling, robotics, machine tools, presses, automotive sector. This product is certified by CUL, CSA and UL. It meets CSA C22.2 No 14, EN/IEC 60204-1, EN/IEC 60947-5-1, EN 1088 and UL 508 standards. It offers protection of operators by stopping the machine when the actuator attached to the machine guard is withdrawn from the head of the switch. Safety switches for the protection of operators, by controlling the safe opening and interlocking of guards and covers in your installations. |
