Compare

You have selected 2 items to compare.

	COBALT DRILL FOR STAINLESS STEEL 6.80MM DIA Product ID: 2110082 Manufacturing MPN: KEN0261360K	REVERSE POWER RELAY 3 PHASE 3 WIRE Product ID: 2098578 Manufacturing MPN: DRP-D
Price	SIGN IN TO VIEW PRICE	SIGN IN TO VIEW PRICE
Ratings	(0) This product hasn't been rated yet.	(0) This product hasn't been rated yet.
Short Description	COBALT DRILL FOR STAINLESS STEEL 6.80MM DIA	REVERSE POWER RELAY 3 PHASE 3 WIRE
Long Description	Heavy duty drill made of 8% cobalt material with excellent heat resistance. To drill steels with tensile strength up to 1,400 N/mm2, very hard bronze, stainless steels as well as heat and acid resistant steels. Point angle: 135°. Helix angle: normal. Web thickness: strengthened. Relief angle: normal. Tolerance of diameter: h8. Tolerance of shank: f11. Supply unit. All diameters - 1 pce. Manufacturing Standard: BS 328, DIN 338B.	The DRP-D provides protection against reverse power for AC generators operating in parallel to each other or the mains. Two sets of contacts are provided: 21-24 is closed immediately upon supply and 11-12 is closed for normal forward current and opened upon reverse power (TRIP) condition. Trip point and time delay can be adjusted to prevent 'motoring' on engine failure and tripping from surges during synchronizing. The unit is calibrated for use with A/5 C.T.'s. The trip point setting is given as 2% to 20% of the reverse current detected. Thus a setting of 10% means tripping will occur when the C.T. current is 0.5A (i.e. 10% of 5A). Time delay is adjustable from 0 to 20 sec. Normal setting is 10 sec. Power supply is taken from the generator voltage and current reference from the generator load current. For opened circuit tripping, the tripping circuit must be connected to contacts 21-24 and 11-12 in series. In this case, tripping will occur upon reverse power condition (11-12 open) or supply failure (21-24 open). For closed circuit tripping, the tripping circuit must be connected to contacts 21 - 22 and 11 - 14 in parallel. In this case, tripping will occur upon reverse power condition (11 - 14 close) or supply failure (21-22 close). There are three LEDs to indicate Supply On (Green), Reverse Power Trip (Red) and Delay Count-down Start (Amber).
Brand/Manufacturer Name	KENNEDY	HOKKIM
Manufacturing Part Number	KEN0261360K	DRP-D
Technical Attributes