| Long Description | 10-piece metal drill bit set HSS-G, DIN 338, 135° drill bit tip. Diameter (mm) 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 10. Working length (mm) 12 , 24 , 35 , 43 , 52 , 57 , 69 , 75 , 81 , 87. Total length (mm) 34 , 49 , 61 , 75 , 86 , 93 , 109 , 117 , 125 , 133 | Suitable for any electrolytic fluid surface (NO VOLATILE FLUID)
AC operating voltage
Protection against interference from power surge
Low electrodes AC voltage to prevent electrolysis for longer life expectance
2 LED status indicator for water supply or drainage
Automatic water supply or drainage operation and alarm for anomaly water supply | CMP manufactures a range of push on shrouds which are used to minimise the risk of dirt or foreign substances gathering on the Cable Gland body, and/or point of cable to cable gland interface. Standard shrouds are produced in Black PVC and PCP. CMP SOLO LSF (Blue/Grey) Halogen Free shrouds are available from stock.
It should be noted that although the addition of a shroud may aid the process of keeping the surface of the cable gland free from the build up of dust or dirt, this does not necessarily improve the Ingress Protection rating of the installed cable gland. Generally cable glands are tested for ingress protection without a shroud being present. In certain conditions the addition of a shroud or other form of external covering may retain unwanted moisture creating a greater threat of penetration than that which it is intended to prevent. In such cases a CMP Deluge Proof cable gland is recommended which negates the need for the use of a shroud and protects the critical migration paths into the interior of the cable gland. |
